Polyester Putalyst na-anwansi na-achọ (Ato) (SB2O3) Pubpery dị ọcha 99.9%
AntimomidiOlu
| Myiri | A na-achọta ihe ngosipụta, Etiothide Athomide, okooko osisi nke Airmomimomic | |
| Ama. | 1309-64 | |
| Usoro kemịkal | Sb2o3 | |
| MURLA | 291.518g / mol | |
| Mputa | ọcha siri ike | |
| Isi | keasi | |
| Keuju | 5.2G / CM3, α-,5.67G / CM3β-ụdị | |
| Na-agbaze | 656 Celsius C (1,213 ° F; 929K) | |
| Isi mmiri | 1,425 ° C (2,597 CHIS F; 1,69KK) | |
| Solibality na mmiri | 370 ± 37μμ0 / l dị n'etiti20.8 Celsius C na 22.9 Celsius C | |
| Soluuru | soluble na acid | |
| Magnetic uka (χ) | -69.4 · 10-6cm3 / mol | |
| Ntinye uche (ND) | 2.0887, α-off, 2.35, β-ụdị |
Grade & nkọwapụta nkeAntimomidi:
| Greedi | Sb2O399.9% | Sb2O399.8% | Sb2O399.5% | |
| Kemikal | Sb2O3% min | 99.9 | 99.8 | 99.5 |
| AS2O3% max | 0.03 | 0.05 | 0.06 | |
| Pbo% max | 0.05 | 0.08 | 0.1 | |
| Fe2O3% max | 0.002 | 0.005 | 0.006 | |
| Cuo% max | 0.002 | 0.002 | 0.006 | |
| Se% max | 0.002 | 0.004 | 0.005 | |
| Fisikal | Whiteness (min) | 96 | 96 | 95 |
| Oke urughuru (μm) | 0.3-0.7 | 0.3-0.9 | 0.9-1.6 | |
| - | 0.9-1.6 | - | ||
Ihe ngwungwu: ngwugwu mpempe akwụkwọ 20 / 25kgs Kraft na nke ime akpa, 1000kgs na pallet na nchebe na-eche nche. Eriri na 500 / 1000kgs net plastik kacha mma na-eji osisi na-enye nchebe na-acha uhie uhie. Ma ọ bụ dị ka ihe ndị na-azụ ahịa chọrọ.
Kedu iheAntimomidieji?
AntimomidiEjiri ejikọtara ya na ngwakọta ndị ọzọ iji nye ngwongwo ndị na-ere ahịa. Isi ihe dị ka dị ka ndị na-ere ahịa na-egbu egbu na ngwakọta na ngwa. Nchikota nke ndi mmadu na a na-egosiputa ihe eji eme ihe iji na-enwu enwu maka polymers, na-enyere aka na-etolite char o pere mpe. A na-achọta ndị na-azụ ọkụ dị otú ahụ na ntinye aka eletrik, akwa akwụkwọ, akpụkpọ anụ, na mkpuchi.A na-achọ (III)bụ onye na-eme ihe nkiri maka iko, ceramics na oroma. Ọ bụ ihe na-enye bara uru na mmepụta nke polyethylene teredhalate (plastik plasti) na ngọsọ nke roba.
