Products

As the key materials for electronics and optoelectronics, high-purity metal is not limited to the requirement for high purity. The control over residual impure matter is also of great importance. Richness of category and shape, high purity, reliability and stability in supply are the essence accumulated by our company since its establishment.

Industrial Grade/Battery Grade/Micropowder Battery Grade Lithium

Lithium Hydroxide is an inorganic compound with the formula LiOH.The overall chemical properties of LiOH are relatively mild and somewhat similar to alkaline earth hydroxides than other alkaline hydroxides.

Lithium hydroxide, solution appears as a clear to water-white liquid which may have a pungent odor. Contact may cause severe irritation to skin, eyes, and mucous membranes.

It can exist as anhydrous or hydrated, and both forms are white hygroscopic solids. They are soluble in water and slightly soluble in ethanol. Both are available commercially. While classified as a strong base, lithium hydroxide is the weakest known alkali metal hydroxide.
Dehydrogenated Electrolytic Manganese Assay Min.99.9% Cas 7439-96-5

Dehydrogenated Electrolytic Manganese is made from normal electrolytic manganese metal by breaking away hydrogen elements through heating in vacuum.This material is used in special alloy smelting to reduce hydrogen embrittlement of steel, so as to produce high value-added special steel.
Nickel(II) chloride (nickel chloride) NiCl2 (Ni Assay Min.24%) CAS 7718-54-9

Nickel Chloride is an excellent water soluble crystalline Nickel source for uses compatible with chlorides. Nickel(II) chloride hexahydrate is a nickel salt that can be used as a catalyst. It is cost effective and can be used in a variety of industrial processes.
Lanthanum Hexaboride

Lanthanum Hexaboride (LaB6, also called lanthanum boride and LaB) is an inorganic chemical, a boride of lanthanum. As refractory ceramic material that has a melting point of 2210 °C, Lanthanum Boride is highly insoluble in water and hydrochloric acid, and converts to the oxide when heated (calcined). Stoichiometric samples are colored intense purple-violet, while boron-rich ones (above LaB6.07) are blue. Lanthanum Hexaboride (LaB6) is known for its hardness, mechanical strength, thermionic emission, and strong plasmonic properties. Recently, a new moderate-temperature synthetic technique was developed to directly synthesize LaB6 nanoparticles.
Samarium(III) Oxide

Samarium(III) Oxide is a chemical compound with the chemical formula Sm2O3. It is a highly insoluble thermally stable Samarium source suitable for glass, optic and ceramic applications. Samarium oxide readily forms on the surface of samarium metal under humid conditions or temperatures in excess of 150°C in dry air. The oxide is commonly white to off yellow in color and is often encountered as a highly fine dust like pale yellow powder, which is insoluble in water.
Manganese(II) acetate tetrahydrate Assay Min.99% CAS 6156-78-1

Manganese(II) Acetate Tetrahydrate is a moderately water soluble crystalline Manganese source that decomposes to Manganese oxide on heating.
High Purity Tellurium Dioxide Powder(TeO2) Assay Min.99.9%

Tellurium Dioxide, has the symbol TeO2 is a solid oxide of tellurium. It is encountered in two different forms, the yellow orthorhombic mineral tellurite, ß-TeO2, and the synthetic, colourless tetragonal (paratellurite), a-TeO2.
Battery grade Manganese(II) chloride tetrahydrate Assay Min.99% CAS 13446-34-9

Manganese(II) Chloride, MnCl2 is the dichloride salt of manganese. As inorganic chemical existting in the anhydrous form, the most common form is dihydrate (MnCl2·2H2O) and tetrahydrate (MnCl2·4H2O). Just as many Mn(II) species, these salts are pink.
Terbium(III,IV) Oxide

Terbium(III,IV) Oxide, occasionally called tetraterbium heptaoxide, has the formula Tb4O7, is a highly insoluble thermally stable Terbium source.Tb4O7 is one of the main commercial terbium compounds, and the only such product containing at least some Tb(IV) (terbium in the +4 oxidation state), along with the more stable Tb(III). It is produced by heating the metal oxalate, and it is used in the preparation of other terbium compounds. Terbium forms three other major oxides: Tb2O3, TbO2, and Tb6O11.
Erbium Oxide

Erbium(III) Oxide, is synthesized from the lanthanide metal erbium. Erbium oxide is a light pink powder in appearance. It is insoluble in water, but soluble in mineral acids. Er2O3 is hygroscopic and will readily absorb moisture and CO2 from the atmosphere. It is a highly insoluble thermally stable Erbium source suitable for glass, optical, and ceramic applications. Erbium Oxide can be also used as a flammable neutron poison for nuclear fuel.
Manganese(ll,lll) Oxide

Manganese(II,III) oxide is a highly insoluble thermally stable Manganese source, which the chemical compound with formula Mn3O4. As a transition metal oxide, Trimanganese tetraoxide Mn3O can be described as MnO.Mn2O3, which includes two oxidation stages of Mn2+ and Mn3+. It can be used for a variety of applications such as catalysis, electrochromic devices, and other energy storage applications. It is also suitable for glass, optic and ceramic applications.
Barium Acetate 99.5% Cas 543-80-6

Barium acetate is the salt of barium(II) and acetic acid with a chemical formula Ba(C2H3O2)2. It is a white powder that is highly soluble in water, and decomposes to Barium oxide on heating. Barium acetate has a role as a mordant and a catalyst. Acetates are excellent precursors for production of ultra high purity compounds, catalysts, and nanoscale materials.